Oklahoma's Deadly Force Law
As you likely know, I am not an attorney and have had no education in law.
If you need clarification on any of this information, seek out a qualified attorney for a legal opinion.
Any of my personal opinions below will be parenthesized, italicized, and in a different color or shade.
OKLAHOMA STATUTES
TITLE 21 § 1289.25 -
PHYSICAL OR DEADLY FORCE AGAINST INTRUDER
A. The Legislature hereby recognizes that the citizens of the
State of Oklahoma have a right to expect absolute safety
within their own homes or places of business.
B. A person or a owner, manager or employee of a business
is presumed to have held a reasonable fear of imminent
peril of death or great bodily harm to himself or herself
or another when using defensive force that is intended or
likely to cause death or great bodily harm to another if:
1. The person against whom the defensive force was used was in the process of unlawfully and forcefully entering, or had unlawfully and forcibly entered, a dwelling, residence, occupied vehicle, or a place of business, or if that person had removed or was attempting to remove another against the will of that person from the dwelling, residence, occupied vehicle, or place of business; and
(From what I understand, entry into my place of business, dwelling, residence, or occupied vehicle, without my permission, constitutes "unlawful entry")
(It's also my understanding that in Oklahoma, breaking the plane of entry into my place of business, dwelling, residence, or occupied vehicle, is considered "forcible entry". So if I had my doors open, with flies flying in and out of the house, and someone walked in, that could be considered "forcible entry". )
2. The person who uses defensive force knew or had reason to believe that an unlawful and forcible entry or unlawful and forcible act was occurring or had occurred.
(It seems to me, that #2, above, indicates that I don't need to have to actually see them unlawfully, and forcibly, entering. I just have to have a reason to believe that an unlawful and forcible entry had occurred. What do you think?)
C. The presumption set forth in subsection B of this section
does not apply if:
1. The person against whom the defensive force is used has the right to be in or is a lawful resident of the dwelling, residence, or vehicle, such as an owner, lessee, or titleholder, and there is not a protective order from domestic violence in effect or a written pretrial supervision order of no contact against that person;
2. The person or persons sought to be removed are children or grandchildren, or are otherwise in the lawful custody or under the lawful guardianship of, the person against whom the defensive force is used; or
3. The person who uses defensive force is engaged in an unlawful activity or is using the dwelling, residence, occupied vehicle, or place of business to further an unlawful activity.
(So, the way I see it (per # 3 above), if I'm cooking meth in my kitchen, or selling stolen car parts, or engaged in any other unlawful activity in my dwelling, residence, occupied vehicle, or place of business, I can't use this law. It doesn't apply to me.)
D. A person who is not engaged in an unlawful activity and
who is attacked in any other place where he or she has a
right to be has no duty to retreat and has the right to stand
his or her ground and meet force with force, including
deadly force, if he or she reasonably believes it is
necessary to do so to prevent death or great bodily harm
to himself or herself or another or to prevent the
commission of a forcible felony.
(To me, the above section "D." is where the statute addresses folks who may have to use deadly force and may have a concealed carry license. I notice two things right away:
1. I can't be engaged in an unlawful activity
2. I have to have a right to be there. So even if I'm a licensed CCW holder, carrying in a business which has a "No Concealed Guns" sign, of some sort, means...I am engaged in an unlawful activity and this statute wont necessarily protect me.
One thing that bothers me on this paragraph is where it says the part about "meeting force with force, including deadly force...to prevent the commission of a forcible felony". I am careful about interpreting this too widely. Using deadly force when it is not reasonable or necessary, such as a property crime, might set me up for a bad day in court!
One other thing:
It seems that "D" may apply to someone without a concealed carry license who has to use deadly force to protect themselves or another. But...they can't be involved in an unlawful activity, so they can't be carrying unlawfully. The deadly force instrument must be lawful.
What other instrument may constitute lawful deadly force? I don't know...maybe an improvised deadly force instrument, such as: The bad guy's gun or weapon, or a stick or rock which is laying around and available.)
E. A person who unlawfully and by force enters or attempts
to enter the dwelling, residence, occupied vehicle of
another person, or a place of business is presumed to be
doing so with the intent to commit an unlawful act
involving force or violence.
(My impression of "E." is... the law "presumes" that a person who unlawfully and forcibly enters a dwelling, residence, occupied vehicle, or place of business, is there to commit a crime. Not just any crime, but a crime involving force or violence.
If there were an attorney handy I might ask, "If the law presumes such a thing, doesn't it mean that I can presume that as well?" It seems that way to me. If so, I think this tells me I have the legal right to come to the conclusion that the intruder is there illegally and intending to use force or violence.)
F. A person who uses force, as permitted pursuant to the
provisions of subsections B and D of this section, is
justified in using such force and is immune from criminal
prosecution and civil action for the use of such force. As
used in this subsection, the term "criminal prosecution"
includes charging or prosecuting the defendant.
("Immune from criminal prosecution and civil action for the use of such force". I'm thinking here that if I meet the presumptions in "B" and "D" I can't be charged with a crime and the law won't allow a successful civil suit being adjudicated against me.
You and I know, just about anybody can sue just about anyone else for just about anything. It's my understanding that if this happens, and it is found that I meet the presumptions in "B" and "D", I can't be found "guilty",
And... (according to "H", below) if such a thing should happen, the folks who brought the suit against me can be made to pay my attorney fees and any reasonable expenses incurred in my defense! Yippee!)
G. A law enforcement agency may use standard procedures
for investigating the use of force, but the law
enforcement agency may not arrest the person for using
force unless it determines that there is probable cause that
the force that was used was unlawful.
H. The court shall award reasonable attorney fees, court
costs, compensation for loss of income, and all
expenses incurred by the defendant in defense of any
civil action brought by a plaintiff if the court finds that
the defendant is immune from prosecution as provided in
subsection F of this section.
I. The provisions of this section and the provisions of the
Oklahoma Self-Defense Act shall not be construed to
require any person using a pistol pursuant to the
provisions of this section to be licensed in any manner.
(When I read this, I think they are saying to me, that I don't necessarily need a concealed carry license to use deadly force. I believe they are saying that this statutes regulates the "use" of deadly force, not the carrying of concealed handguns.)
J. As used in this section:
1. "Dwelling" means a building or conveyance of any kind, including any attached porch, whether the building or conveyance is temporary or permanent, mobile or immobile, which has a roof over it, including a tent, and is designed to be occupied by people;
2. "Residence" means a dwelling in which a person resides either temporarily or permanently or is visiting as an invited guest; and
3. "Vehicle" means a conveyance of any kind, whether or not motorized, which is designed to transport people or property.
(If a "dwelling" is not necessarily a "residence" that means it can be other things. In particular, it seems to me, it is a building or conveyance of any kind. A building of any kind describes all buildings, does it not? So, it seems to me that that a dwelling is any building that is designed to be occupied by people. It is not a residence because residence is defined differently.)
Monday, January 2, 2012
Tuesday, December 20, 2011
Newsletter Article December 22, 2011

Used Guns: Tips on Checking 'em Out
NOTE: The following is information that I took from several sources. I am not a gunsmith, just a "gun guy". Your best bet will probably involve a qualified gunsmith looking at your guns for you. When you can't, the following may help.
As in any endeavor with firearms, Safety is the watchword. Before inspecting any gun, make sure that it is unloaded. No rounds should be chambered. Physically and visually check to make sure.
It may be advisable to perform these checks on your guns periodically to get an idea of acceptable tolerances, and to gauge wear. Plus, it's just another excuse to get your guns out and piddle with them!
REVOLVERS
Initial Look
First, look at the gun, checking the muzzle, the grip, and the hammer for indications that it's been dropped: Marks, dimples, cracks, or other damage. A gun that has been dropped a lot is an indication that other conditions may exist due to the previous owner's reckless behavior. Here's a good example of a checklist for inspection.
Cylinder Gap
Look at the cylinder gap. This is the area between the front of the cylinder and the forcing cone at the back of the barrel. A flashlight or white surface in back of the gun helps see the cylinder gap. The surfaces should be parallel to each other. If the gap is wider at the top, the top strap may have been stretched (sometimes happens with shooting a lot of high pressure loads). When that happens, the gun may shoot, but will likely shave off lead and/or jacket material which can affect the velocity and accuracy of the round.
If there is too much of a cylinder gap, there may be excessive "end shake", or too much movement of the cylinder forward and rearward. This is something you'll need to consult with your gunsmith about.
Normally .006" to .008" is considered fine. If greater than .010", you'd better take the gun to a reputable gunsmith to have it checked.
Trigger & Hammer
Check the hammer. Will it function both in single action and double action? If it doesn't work single action, it may be bent.
When you cock and release the hammer, notice the feel. If you feel the hammer scraping against the body of the gun, again, you may have a bent hammer. (possibly from being dropped)
Dry-fire the gun. Before releasing pressure on the trigger look through the gap at the back of the cylinder. You're looking for the firing pin nub. If you can see it, that's a good sign.
Cylinder Lock-Up
Check the play in the cylinder with the hammer forward and then with the hammer cocked. Too much play can indicate wear that allows the cylinder to be out of time with the forcing cone & barrel. You can take a pencil or wooden dowel to see how well they line up.
With the gun unloaded, you can shine a light into the gap at the rear of the cylinder, and looking down the barrel to see how it lines up. This is, by no means, a precision test, but if there is a noticeable misalignment, you know you have a problem.
Cylinder
The cylinder release should operate surely. It should move without catching both directions. It should fully release and allow the cylinder to swing out. When opening, the cylinder should not bind or catch on the frame, it should be a free and easy movement.
Inspect the face of the front of the cylinder. There should be little to no scrape marking on the cylinder around the chamber. The rear of the cylinder should show no excessive wear with the chambers being square to the face. Some folks bevel their chambers to better facilitate loading and reloading the gun. The edges should be clean and free of scratching, burrs, and other abrasive indications.
Look for peening around the locking slots.
The cylinder should close and lock without forcing it using a moderate amount of pressure, on all chambers. If one or two chambers take more pressure to close the cylinder, the crane (hinge hardware to which the cylinder is attached) may be slightly bent.
The Barrel
Look at the barrel. On single-actions you will likely have to remove the cylinder pin to get the cylinder out. Look inside the barrel. Bad signs are pitting, or a ring or rings somewhere along the barrel. Scratches and abrasions are signs of mistreatment.
A barrel in good condition will have a near mirror finish with the rifling in good shape. The muzzle will be in pristine condition and the forcing cone will have clean sharp edges.
Run your fingers down the barrel feeling for bulges. Sometimes you can feel a bulge that is not easily seen.
A dirty or lead/copper fouling in the bore, it not necessarily a bad sign but it can hide rust or pitting.
Frame
Check the frame for damage: cracks, dimples, & chips. Look in the corners of the top strap. Be on the lookout for indications of high heat, stress, or fractures.
Don't
Spin the cylinder (single-action)
Shut or open your cylinder with a flick of the wrist (Hollywood style) on swing-out cylinders
Fan the hammer (single action)
SEMIAUTOMATICS
Here is a checklist for inspecting the 1911.
The Slide
Check the end of the slide, the magazine well, and the hammer (or back of the slide if no hammer) for signs of being dropped.
The slide should be inspected. Cracks are a bad sign and will have to be replaced.
Rack the slide to see how smoothly it operates. Any binding or grating indicates repairs needed to facilitate reliability.
Brass marking on the rear of the ejection port? A lot of it means that gun has had a lot of rounds through it. That's something to consider.
Safeties
Operate and test each safety and/or decocker to make sure it does what it is supposed to do. Levers should move smoothly and go into place without forcing.
Some safeties have intentionally been made inoperable, such as by pinning a grip safety on a model 1911. There is not much, if any, advantage to most shooters in having an inoperable safety. A safety that does not work as designed takes away from the value of a gun.
Hammer
Cock the hammer both manually and with the operation of the slide. The hammer should click into place with no rubbing against the frame.
Trigger
Check the trigger pull. Trigger pull can vary widely among semi-autos so it's good to have some experience of how it should feel. Trigger movement is very much an individual preference. Generally, single actions have a little "take-up" and then stop... and then with increased pressure will drop the hammer. Double-actions and double-action-onlys have more staging and require more pressure on the trigger pull.
Feed Ramp
On some semi-autos the feed ramp is attached to the breech-end (back) of the barrel. It functions to guide the cartridge into the chamber at the back of the barrel. when the slide strips the cartridge off the top of the magazine.
On 1911s, the feed ramp is in two parts. Part of the feed ramp is a part of the barrel, but below it is a ramp that is part of the frame of the gun. If the ramp is in two pieces (one - part of the barrel, the other - part of the frame), there should bed a bit of a gap between the two (normally 1/32". Right up against each other is not desirable here.
Look at the feed ramp. The ramp should be free of any abrasions or marks. No grinding marks. No rough edges. It should shine.
The Bore of the Barrel
To check the bore, use a bore-light, a flashlight, or a white piece of paper or cleaning patch to reflect light from one end to the other. It should be clean. If it's not clean the fouling can hide pitting or other problems. If the bore's finish is milky-looking, not mirror-finished, it may be in good condition, and just lacking in a good scrubbing.
The muzzle should be in pristine condition. If not, it can adversely affect the accuracy and effectiveness of the ammunition you shoot. The muzzle is the last part of the gun that has contact with a fired bullet. Figure on having a gunsmith repair the muzzle if it is not in perfect condition on a working gun.
Firing Pin
The way to see if a firing pins works on a semi-auto is to point an unloaded gun up, toward the ceiling, cock it and insert a dowel rod or a pencil down the bore. Press the trigger. If the dowel rod/pencil jumps up, the firing pin hits. On some semi-autos the firing pin hits hard enough to shoot the dowel rod/pencil quite a ways up. It could hit the ceiling. Example here.
Summary
I learned a lot while researching this article. I hope it will be of use to others as well.
The watchword is safety. In concert with that, that there are things you can look for that will give you an idea of the condition of a handgun.
Have a wonderful Christmas and a great New Year!
Don
Here are a few other articles on handgun inspection.
Buying a Used Handgun
Inspection Guide To Used Guns
Revolver Inspection
How-To Guide For Buying Used Handguns
Colt Revolver Inspection Checklist
Shopping For And Inspecting Used Revolvers
Tuesday, November 29, 2011
Tidbits - November 29th, 2011
In my newsletter is a section called "Tidbits". It contains snippets, normally available online, of things I feel are of interest. Below are some that I have taken from previous issues. (To subscribe go to my website , and click on "Newsletter Subscription" at the bottom of the page.)
http://guninstructor.net/articles.html
Rob Pincus talks about "Understanding Sight Alignment & Sight Picture in the Context of Defensive Shooting". This is available from:
http://www.imakenews.com/valhalla/e_article002283411.cfm?x=bkkbQGg,bm2s6VTC
The Oklahoma City pharmacist Jerome Ersland case is evaluated by Massad Ayoob in the Ayoob Files in the 2012 of American Handgunner. It answers a lot of questions.
http://fmgpublications.ipaperus.com/FMGPublications/AmericanHandgunner/AHJF12/?page=18
http://guninstructor.net/articles.html
Rob Pincus talks about "Understanding Sight Alignment & Sight Picture in the Context of Defensive Shooting". This is available from:
http://www.imakenews.com/valhalla/e_article002283411.cfm?x=bkkbQGg,bm2s6VTC
The Oklahoma City pharmacist Jerome Ersland case is evaluated by Massad Ayoob in the Ayoob Files in the 2012 of American Handgunner. It answers a lot of questions.
http://fmgpublications.ipaperus.com/FMGPublications/AmericanHandgunner/AHJF12/?page=18
Newsletter Article December 7, 2011

HOLSTERS
The Other Part of Your Concealed Carry Equipment
Carrying concealed on a regular basis tends to require that we make a "shift" in our wardrobe choices. The holster plays an important part in making a variety of carry options practical. This video of Clint Smith's shows a bunch of holsters and carry "systems" at the beginning. Of course, Clint's summary of the whole ordeal is entertaining and educational.
Check The Condition of Your Holster(s)
I know I have been guilty of ignoring my holsters and letting them degrade into questionable condition. Holsters should be considered to be more than just an afterthought. They are an important part of your carry system.
Holsters 101
Galco, a leading brand of quality holster, has a Q&A page on their website that addresses such things as:
Holster Break-In
Care and Maintenance (both leather & polymer products)
and more...
Blending In
Like our clothes, holsters have a situational component to them. How practical a particular holster is, often has to do with the weather, what we are doing, and how many layers of clothing (or lack thereof) we have available to conceal our handgun.
When Bad Things Happen
About a year ago there were some photos making their way around the internet warning about the dangers of buying a leather holster. An accidental discharge caused by a wrinkle in the leather set a fellow's pants on fire. Here is a more civil discussion of the event (with pics).
Although some used that incident to campaign against leather holsters, more importantly, the message drove home the importance of checking your gear to see that it is in good order. Whether it's the condition of the leather, or kydex, we should have a look and make sure the holster is doing what it's supposed to do.
What's a Holster Supposed To Do?
The purpose of the holster is to hold the gun safely and firmly in a place where we intend it to be. For that to occur, the holster has to be in good, predicable, working order.
Off-Body Carry
About a year and a half ago, a woman, here in Tulsa, coming home from work, was robbed and assaulted as she was entering her home. Fortunately for her, she had a snubbie in her purse, was able to get to it, and handled the situation. Purse carry, while it has it's disadvantages, has proven to be a viable means of keeping a gun accessible.
So it is with carrying a gun in a briefcase or day planner type satchel. It is, in my opinion, not the optimum method of carry, but it can and has been effective for some folks.
Other Carry Solutions
One of the first holsters I bought when I first got licensed was a "fanny" pack type holster. It actually works great. It's easily accessible and can be positioned where it works best. Fanny packs are not as common now, and they may be more attention-getting, especially if black colored. It may be advisable to get a colored fanny pack that does not look so "tactical".
There is also a variety of "undergarment holsters" that have pockets sewn into them which will hold a handgun. They are considered "deep concealment" systems in that they are normally not as easily accessible.
Wallet holsters and pocket holsters are also options to consider. In my opinion, everyone should have a pocket holster. Practically all of us have thrown a gun into a pocket at one time or another (and I do it often).
Pocket holsters do three things for us:
1. Keep the gun oriented in a position where it can be accessed.
2. Reduce the "printing" of the gun in your pocket.
3. Reduce wear on your pockets.
http://www.blogger.com/img/blank.gif
Inside the Waistband Holsters (IWB)
Belt carry has been made more viable with a holster that secures to your belt but the body of the gun is actually inside the pant. Some IWB holsters allow you to tuck your shirt in around the gun, fully concealing the gun. Matt (at www.libertydefensesolutions.com) sent me this youtube video (http://www.youtube.com/watch?v=7gjUknHqvGY&feature=uploademail) that very well shows some of the options available and how they work.
Summary
There's no better way to begin and end an article dealing with gun technique by showing a Clint Smith video clip. Clint has a way of communicating these concepts so that you are likely to understand and remember the salient points.
Don
Tuesday, November 15, 2011
Women Only Classes in January
Sunday, January 22nd, 11AM until 7PM, at Red Castle's Indoor Range, near 11th & Lewis. A great class. Bring a friend to mulltiply the "fun times" factor!
Need more info? http://guninstructor.net/conceal.html
Need more info? http://guninstructor.net/conceal.html
Saturday, November 12, 2011
Newsletter Article November 23rd, 2011

SMALL CALIBER GUNS FOR SELF-DEFENSE
For years guns have been produced in the twenty-some-odd caliber size for self-defense. While most of the shooting community views these calibers as "probably ineffective", no one that I know would volunteer to get shot with one.
I have heard it said that more people die from .22 gunshot wounds than any other caliber. Having not found anything that verifies that data, I know that the .22 caliber round can be and has been deadly.
That being said it's effectiveness is about half of what you get from .380 + calibers.
So Why Bother?
One nice thing about small caliber guns is...they can be manufactured smaller than .38, 9mm, .40, .45, and the like. And as Mark Moritz is said to have said, "The first rule in a gunfight is to have a gun." And we know, oftentimes, just the presence of a gun can scare off an attack.
The point of concern for most of us in the gun community is: What if I actually have to use it? Will it work? How likely is it that it will stop an attacker?
Just the facts ma'am
For the sake of comparison, here are the "One Shot Stop" percentages listed in Sanow and Marshall's most recent publication, Stopping Power: (Keep in mind that this is using the best performing ammo.) This data represents what percentage of the time, in actual shootings, one round to the torso area, ceased an attack.
.22 Long Rifle 40% Quik Shok HP (a frangible)
.25 ACP 27% Winchester Expanding Point
.32 ACP 66% Winchester ST (Silvertip)
.380 ACP 70% Federal Hydra-Shok
.38 Spec. 2" 67% Winchester 158 gr. lead HP +P
.38 Spec. 4" 80% Corbon 115 gr. +P+
9mm Compact 87% Remington 115 gr. +P+ JHP
9mm 90% Federal 115 gr. JHP +P+
.357 Mag 96% Federal 125 gr. JHP
.357 Sig 92% Federal 125 gr. JHP
10mm 90% Corbon 150 gr. JHP
.40 Compact 89% Remington 165 gr. GS (Golden Sabre)
.40 94% Remington 165 gr. GS
.41 Mag 90% Winchester 170 gr. ST
.44 Spec. 76% Winchester ST
.44 Mag 92% Winchester 201 gr. ST
.45 Colt 51% Federal lead HP
.45 ACP Compact 90% Remington 185 gr. GS
.45 ACP 96% Federal 230 gr. HS
NOTE: This data was published in 2001. There have been a lot of ammo developments since then. No other empirical studies on the subject have been done since then, that I know of. Even though that is the case, this study still gives us a realistic picture of how ammo/caliber performed in actual shootings.
The 22 Magnum and the 5.7
One of the many calibers not included in the above study (probably for lack of an adequate sample), is .22 magnum. Also the 5.7 is too new to be included.
Recently Kel-Tec came out with a 30 round .22 magnum semi-automatic pistol. What it lacks in bullet diameter, it may make up for in velocity and firepower (number of rounds available).
About seven years ago FN came out with the 5.7 x 28 mm semi-auto. It was intended as a military handgun designed to push rounds into the 2500 fps range. Not getting any huge military contracts, FN manufactured it anyway for the civilian market. With legal Hornady V-Max ammo (sub-2000 fps, wont penetrate body armor) it may be perceived as a good defensive system.
The Kel-Tec holds 30 rounds in it's standard magazine while the FN holds 20. The velocity of the FN is a few hundred fps faster (about 1700 versus about 1300 fps). Bullet diameter and bullet weight is close to the same.
Gun Tests compared the two in their November 2011 issue. After reading the article, I wanted both!
Those Cute Lil' Guns
It seems that the North American Arms pocket rockets are as popular now as they ever have been. I have little confidence in such a small gun. Those teeny-weeny five-shot revolvers are a bit cumbersome to load and unload. BUT...that little gun fulfills the #1 rule of a gunfight, "Have a gun." And...I'd rather have one of those itty-bitty guns than no gun at all.
North American Arms has a new "Top Break" model that makes loading and unloading quite a bit easier.
Rimfire vs. Centerfire
One of the problems with cheap .22 rimfire rounds is that they are not very dependable. This is due to the fact that an air-bubble (or a lack of primer material) can exist within the rim. That's why we tend to see a lot of misfires with .22 ammo.
So you have to spend a little more to get a more reliable shooting cartridge. If you have a .22 that you keep around for self-defense, go splurge on ammo. That "click" sound, when you're expecting a "bang", isn't so bad on the range, but in a defensive critical incident.....eeek!
.22LR Semi-auto vs. .22LR Revolver
With ammo un-reliability being a possibility, the likelihood of having to do the tap-rack-bang drill increases. And some of those little .22 semi-autos are just plain hard to rack. With a revolver, if you experience a misfire, you just cock and fire again. (a real plus for wheel-guns!)
Summary
There is no doubt in my mind that for self-defense, the .22 LR is an inferior round, when compared to center-fire cartridges. And the best performing .22 LR, the Quik Shok is harder to find than the next closest performer (at about 38%), the .22 LR CCI Stinger.
The .38 Special out of a 2" barrel has demonstrated a 150% increase in effectiveness over the .22 LR. So if I'm choosing one over the other, for me, the 38 snubbie wins!
But, if for some reason I couldn't make anything other than a .22 mouse-gun work, I'd stuff as many in my pockets as I could get. With reloading being a formidable issue in many of the little guns, a "New York reload" may be the only way to go. (New York reload = spare gun)
There, in my opinion, are some applications for the micro-guns, limited as they may be. If you've got one that you're going to use for self-defense, learn to fight with it and pick good ammo!
Don
Monday, November 7, 2011
Newsletter Artcle November 7, 2011

"Gun Totin' Women "
"I declare to you that woman must not depend upon the protection of man, but must be taught to protect herself, and there I take my stand."
-Susan B. Anthony
A recent Gallup poll finds that 43% of all women own a gun or guns.
Who Would Notice?
It seems that recently the gun manufacturing world has put a lot of attention on marketing to women. There's a good reason for that. More and more women are making themselves known in the gun community.
Louise Mandrell
You Tube Gun Authority Lima Life
Il Ling New
Back in 1993, at the Grand National Gun Show here in Tulsa, my wife and I bought a .38 Special Snubbie that was branded as the "Ladysmith". It had beautiful rosewood grips and a deep luster and polish to the bluing. It was absolutely beautiful. Much like this.
Now, many companies are following the trend to market to women. There is no doubt that men and women respond differently to design and/or decoration. Putting a splash of pink or violet on a gun is akin to adding pin striping to a car. It can make it prettier, cooler, or more striking in appearance.
Charter Arms Pink Lady
Sig Sauer Mosquito Pink Finish
A bunch of pink guns
Accessories and support products for female gun handlers also have made their way into our local market. We have a superb manufacturer and supplier here in Tulsa:
http://www.thebagladyoftulsa.com/
I had the pleasure of teaching a couple of "women only" concealed carry classes last summer and it was a blast. I had more good questions and comments in those classes than I've ever had in a co-ed class. And they were good, practical questions. Women simply bring a special touch to subject.
Female Gun Authorities
But also there are some great female gun authors out there. To name a couple: Paxton Quigley and Gila Hayes. These ladies don't just write for the ladies, they write for gun folks, male and female.
And one of my favorite websites is "Cornered Cat". Kathy Jackson has constructed a fantastic website that is packed full of practical gun oriented information.
So, if you are a woman, or happen to know a woman, or you just like learning stuff... don't make the mistake of not checking into some of these female-oriented resources. They add a dimension to gun-related issues that, when considered, form a more complete picture of the whole gun thing.
- Don
Related Articles
The Real Ladies Handgun - by Massad Ayoob
"When I'm with a pistol I sparkle like a crystal, yes I shine like the morning sun." -Annie Oakley
Subscribe to:
Posts (Atom)
